Box and carton dieline templates
Create folding cartons, ecommerce mailers, one-piece folders and common corrugated slotted cases.
Free RSC Corrugated Box Dieline Generator
Generate a regular slotted case starting layout for the common FEFCO 0201-style shipping box. Enter the finished length, width and height to create four body panels, paired flaps and a manufacturer joint.
Create a free dieline 19 editable templates No account required Browser-only artwork preview Private supplier SVG comparison Converter review required
Structures19Cartons · mailers · labels · pouches
Exports4SVG · PDF · DXF · PNG
Geometry1:1Millimetres with named layers
Private by design
Upload your finished dieline artwork
Use the same artboard size as this dieline. SVG gives the sharpest preview; PNG, JPG and WebP also work.
or upload your own artwork
Processed on this device. Nothing is uploaded or stored.
Private browser comparison
Compare a printer or supplier dieline
Overlay a production SVG on this generated dieline to check scale, page size and obvious structural differences. The file never leaves this browser.
Use a linework-only SVG where possible. Artwork, scripts and external references are removed before display.
Layers
Geometry generated
Scale 1:1 · millimetres- Structure
- RSC · FEFCO 0201 starting layout
- Inside size
- 300 mm × 200 mm × 180 mm
- Flat size
- 1029 mm × 382 mm
- Manufacturer joint
- 25 mm
- Flute/stock allowance
- 0.5 mm
Corrugated score allowances and manufacturer-joint construction vary by flute, liner and converting equipment.
3
Download your dielineA clean, empty template to build your artwork on in Illustrator or InDesign. Email verification once — every format then stays unlocked on this browser.
Optional Generate a barcode to add to your artwork Downloads separately — kept off the dieline so you place it yourself
Optional Plan your print run Sheet nesting & board-cost estimate
Sheet nesting & board cost
Regular slotted case · FEFCO 0201 starting layout · blank 1035 × 388 mm incl. bleedBoard price per sheet in your currency. Blank hides cost figures.
Blank is 1035 × 388 mm — larger than the 700 × 1000 mm sheet. Try a bigger sheet size.
After you design Preflight your artwork Upload your finished PDF to check it against this die
Checking against: Regular slotted case · FEFCO 0201 starting layout · 1029 × 382 mm flat · 3 mm bleed
Powered by our PDF Preflight tool.
Template guide
When to use this rsc corrugated box dieline
Corrugated allowances change with flute, liners, score rules and converting equipment. Treat this as an artwork and estimating start point, not a cutting-die specification.
Common uses
- Shipping and transport cartons
- Ecommerce and subscription boxes
- Food, beverage and consumer-goods cases
How to create a packaging dieline online
A dieline is the flat blueprint for a package. It identifies the cut, fold, crease, perforation, bleed, safe and glue areas that packaging artwork must follow.
- 01
Choose a packaging template
Select a folding carton, mailer, corrugated box, label, hang tag, sachet or stand-up pouch starting structure.
- 02
Enter the finished dimensions
Set the inside or outside size in millimetres or inches, then adjust bleed, safe margins, stock and structure-specific controls.
- 03
Preview and export the dieline
Check the flat and folded views, compare an optional supplier SVG, preview your artwork on a private 3D mockup, then download SVG, PDF, DXF or PNG.
Packaging dieline templates and editable export formats
Start with common packaging structures and download files that remain editable in design, prepress and CAD software.
Label, hang tag and pouch dielines
Generate rectangle, round, oval and wrap labels, a configurable hang tag, flat sachet or stand-up pouch artwork guide.
SVG, PDF, DXF and PNG exports
Keep named vector and CAD layers for cut, fold, perforation, bleed, safe areas, dimensions and panel labels at 1:1 scale.
Private 3D packaging artwork mockup
Upload a finished SVG, PNG, JPG or WebP and rotate the packaging mockup without sending the artwork to a server.
Compare a supplier dieline SVG
Overlay a printer or converter SVG, calibrate its document width and inspect alignment without uploading the file to GoVisually.
Packaging dieline generator FAQs
Answers about dieline templates, dimensions, export formats and production use.
Is this a FEFCO 0201 production drawing?
It follows the familiar RSC or FEFCO 0201 panel arrangement, but the box plant must apply its own flute, score and manufacturer-joint allowances.
What is a packaging dieline?
A packaging dieline is the flat, unfolded template that shows where a box, label or pouch will be cut, folded, creased, perforated and glued. Designers place artwork against these guides before the package is printed and converted.
Is this dieline generator free?
Yes. You can create and preview as many custom dielines as you need. One email verification unlocks SVG, PDF, DXF and PNG downloads on the current browser; it does not create a GoVisually account.
Is this a final manufacturing die?
No. It is a customizable dieline starting file built from the dimensions and settings you provide. Your printer or converter must still confirm stock caliper, crease allowances, closures, tooling and equipment-specific tolerances before production.
Which packaging dieline templates are included?
The generator includes 19 structures across folding cartons, winged and tab-lock mailers, one-piece folders, RSC, FOL, HSC, multi-depth and CSSC corrugated cases, tray-and-lid packs, labels, hang tags, sachets and stand-up pouches.
What does the DXF dieline export contain?
The DXF is written in millimetres with separate CUT, FOLD, PERFORATION, BLEED, SAFE_AREA, DIMENSIONS and PANEL_LABELS layers. Curves are exported as CAD-compatible circles or polylines.
What is the difference between inside and outside box size?
Inside size describes the usable cavity of a finished box. Outside size describes its finished exterior. When you choose inside size, the generator applies a nominal stock-thickness allowance to the structural panels. Your converter should confirm the final caliper and crease allowances.
Can I save or share a custom dieline?
Yes. Your latest dieline configuration is saved in the current browser. The Share control copies a URL containing the template, dimensions and all structure-specific production settings.
Can I preview packaging artwork in 3D without uploading it?
Yes. The 3D artwork mockup reads your SVG, PNG, JPG or WebP file and maps it onto the package entirely inside your browser. The artwork is not sent to GoVisually or stored on a server, and it is discarded when the browser tab closes. The result is a concept mockup, not a production proof.
Can I compare this dieline with a printer or supplier SVG?
Yes. The Compare file view overlays a printer, converter or supplier SVG on the generated dieline. You can calibrate the supplier document width, adjust scale, position, rotation and opacity, and inspect obvious discrepancies. The SVG is sanitised and processed only in your browser. This visual comparison does not replace converter approval.
Review and approve your packaging artwork in GoVisually
Compare revisions, collect feedback, run artwork checks and keep every approval in one place.